+ Adhesives
    - Delta Tile Glue FX-901
    - Delta Tile Glue FX-903
  + Grouts
    - Delta Tile Grout
  + Repair Products
    - Delta Non Shrink Grout
    - Delta Premixed Plaster
  + Water Proofing System
    - Delta Coat 245
    - DELTA SEA 201
    - Bitumen Products
  + Coating & Filler
    - Delta Crack Filler
    - Delta Putty
    - Gypsum Compound
  + Admixture for Mortars
    - Delta Bond PVA
    - Delta Bond SBR
  + Cleaning
    - Delta Cleaner
       
 

DELTA SEA 201 (SINGLE COMPONENT SEALING COAT)

DELTA SEA 201 is a mono component cement based water Proof & sealing coating for masonry and concrete resistant to positive and negative water pressure. It is composed of cements, fillers and additives. The product is non toxic and can be in contact with drinking water.

Scope of use :

  • External coating on any construction.
    • Vertical
    • Underground.
    • Immersed
  • Internal coating of construction with negative pressures.
    • Completely watertight departments
    • Immersed cellars
    • Lift holes
    • Car parks
    • Waterproofing of tunnel galleries
    • Waterproofing drinking water reservoirs
    • Waterproofing of swimming pools
    • Coating on expanded polystyrene
    • Waterproofing under tiles

Advantages :

  • pre mixed component, just site mixing.
  • Easy application by brush or trowel.
  • Impermeable, increased frost and salt resistant.
  • Excellent damp proofing to porous and non-porous surfaces.

Product Preparation: The substrate must be perfectly sound, clean, and free from grease and friable matters. Wet abundantly the surface to be treated. The product as supplied is ready for use just adds 4 to 6 liters of clean water for every 20 kg of powder to get homogenous paste which can be applied by a brush.

Application : Apply 1st layer of DELTA SEA with sufficient thickness to plug pores, cracks and holes@ 1.5kg/m2. Apply 2nd 3rd layers in the proportion of 0.5 to 1 kg/m2 apply DELTA SEA with a brush, roller or trowel.

  • For Drinking water Reservoiers: First repair all cracks with DELTA REPAIR N.S. Apply 2 coats of DELTA SEAING SLURRY on the walls and flooring of the reservoir @ 2kg /m2 in the 1st coat and @1 to 1.5 kg/m2 in the 2nd coat.
  • For watertight departments under high negative pressure : First repair all cracks and leaks with DELTAPLUG (Plugging mortar) Apply 2 or 3 coats of DELTA SEA. recommended consumption is 2 to 3Kgs /m2
Packing : 20 KG Plastic bags.

Precaution - Health & Safety : As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packing for specific instruction).Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for he medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.

Storage : All materials should be stored under cover and clear of the ground. Protect from all sources of moisture and frost. Rotate stocks in order not to exceed the shelf life of 12 months. Wind and direct sunlight must be avoided.

Technical Supports : DELTA provides on site technical assistance and guidance for use of our products. For furthers information consult DELTA technical services.

 

© Dohabay Construction Chemicals, Doha - Qatar. All rights reserved.