Delta Tile Glue FX-903 (for Swimming pool and high risk conditions)
DELTA FX 903 is cement-based, polymer modified and non shrink tile adhesive for thin and thick bed fixing of ceramic tile in interior and exterior situation, especially those exposed to permanent wet conditions.It is suitable for fixing materials such as stone cladding and bricks slip. Best suited for tropical climates.
Application :
- It is suited for swimming pool and shall be use in confidence
- in all wet process application including , shower room, institutional kitchens, bathrooms and
- high risk claddings for
extreme conditions such as vibration or temperature extreme
Advantages :
- Waterproofing immersion will not affect adhesion.
- No slip.
- Ready to use for just add water.
- Long open time.
- High bonding strength.
- Forms a waterproof bond.
Technical Description :
| Appearance |
white/gray powder |
| Working Temperature |
+5oC to + 40o C |
| Water Ratio |
4 to 5 lts/20kg |
| Coverage |
5-6kg/m2 (with a 5mm notched trowel)
|
| Shelf life |
12 months stored at 30 C in original packing |
| Initial Setting |
25 to 30 minutes |
| Tensile strength 28 days |
2 N/mm2 (EN1348 A)
1.8 N/mm2 (EN1348B) |
Compressive strength 28 days
|
20N/mm2 |
INSTRUCTIONS FOR USE:
Surface Preparation : Surface must be clean, sound free from dust
and greasy matter. If dry moisten the substrate lightly,never moisten the tiles. Smooth surfaces should be sand blasted. Saturate absorbant concrete surfaces to surface saturated dry condition.
Product preparation : Mix DELTA FX 903 in the proportion of 4 to 5 liters of water for 20kg of powder
and mix with a low speed mixer to get a paste of thick consistency.. Let the mixture stand for about 10 minutes for the resins to dissolve completely.
Product Applications : Apply DELTA FX 903 evenly on
the substrate with a notched spatula to give uniform thickness. Then fix the tiles on the substrate and press
them firmly with a twisting action so that the bonding is perfect and the tiles do not slide.
Packing : 20 kg plastic bag.
Standards : Tested in laboratory in accordance with BS5980:1980
8.2 of BS EN 1348: 1999
8.4 of BS EN 1348 : 1999
Surpasses EN standard for C 1 Ceramic tile adhesion
Precaution - Health & Safety : As with all chemical products caution,should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instruction). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available
for the medical attendant to examine any relevant instructions and contents details.Reseal all containers after
use and ensure a product is stored as instructed on the
safety section of the labelling.
Storage : All materials should be stored under cover and clear of
the ground. Protect from all sources of moisture and frost.
rotate stock in order not to exceed the shelf life of 12 months. Wind and direct sunlight must be avoided.
Technical Supports : DELTA provides on site technical assistance and guidance for use of our products. For further information consult DELTA technical services.
|
